6048-JD67 John Deere 600/700 Series Pallet Fork Frame

Description

The 6048-JD67 John Deere 600/700 Series pallet fork frame gives operators a dedicated 6,000 lb attachment for moving palletized and properly supported materials with a compatible tractor loader. This complete AG-GO package includes the loader frame and 48 inch pallet forks, eliminating the need to select the frame and fork pair separately. It is intended for John Deere loaders equipped with the applicable 600/700 style attachment carrier, providing a machine-specific alternative to universal skid steer or Euro/Global frames.

The included forks measure 1.75 inches thick by 4 inches wide by 48 inches long. Their working length suits many standard pallets, feed and seed supplies, fencing materials, lumber, equipment, and general farm or commercial loads when the material is stable and properly positioned.

Confirm the John Deere 600/700 Series Pallet Fork Frame Fit

The 6048-JD67 is designed around the John Deere 600/700 style loader connection. That description refers to the attachment-carrier interface—not every tractor or loader carrying a 600 or 700 model designation. John Deere loaders may be equipped with different carrier options, including Global or skid steer-style systems, so the machine brand and series number alone do not confirm fit.

Before ordering, compare the attachment-side connection with the carrier currently installed on the loader. Check the upper engagement points, lower locking-pin locations, carrier width, and latch operation. If the loader has been converted with an adapter or replacement carrier, identify the interface that is on the machine now.

Once attached, verify that both sides engage fully and that the locking components seat correctly before lifting. The frame should not be used with partially engaged hooks, misaligned pins, or an unverified adapter arrangement. Operators who need a different connection can compare other AG-GO pallet fork frames, including universal quick attach and Euro/Global configurations.

48 Inch Forks and 6,000 lb Published Rating

The supplied fork pair combines a 1.75 inch blade thickness, 4 inch width, and 48 inch length. The standard working length provides support beneath many common pallets without the additional maneuvering space required by longer forks. Buyers should still confirm pallet-opening dimensions, load depth, underside clearance, and the amount of blade support required for the materials they handle.

The frame and included forks have a published 6,000 lb rating. That rating does not automatically become the loader’s usable lifting capacity. The tractor, loader, carrier, attachment, fork pair, load position, and ballast setup all affect safe operation. Never exceed the lowest applicable rating in the complete system.

Load center also matters. A long or uneven load positioned farther forward creates more leverage on the loader than the same weight carried close to the fork shanks. The related pallet fork capacity and load-center guide explains why load position can change available lifting capacity. Follow the machine manufacturer’s operating instructions and use appropriate rear ballast when required.

Unlike over-the-bucket forks, the 6048-JD67 replaces the bucket with a dedicated pallet fork attachment. This keeps the load closer to the loader than a fork system mounted in front of the bucket and gives the operator an unobstructed fork arrangement for approaching suitable pallets and materials.

The 6048-JD67 is manufactured in the USA at PRO-Link’s production facility as part of the AG-GO attachment line. It is covered by PRO-Link’s one-year limited warranty against manufacturer’s defects, subject to the complete warranty terms.

Questions & Answers

Does the 6048-JD67 fit every John Deere 600 or 700 Series loader?

No. It is intended for compatible loaders with the John Deere 600/700 style attachment carrier. Confirm the carrier currently installed on the machine, especially if the loader has been converted or fitted with an adapter.

Are pallet forks included with the frame?

Yes. The package includes 48 inch forks measuring 1.75 inches thick by 4 inches wide. The complete frame-and-fork assembly has a published 6,000 lb rating.

Can my loader lift the full 6,000 lb rating?

Not necessarily. The machine, loader, carrier, ballast, load center, and attachment each have operating limits. Use the lowest applicable rating and follow the loader manufacturer’s instructions.