6048-UWT 6,000 lb Skid Steer Pallet Fork Frame

Description

The 6048-UWT 6,000 lb skid steer pallet fork frame is an AG-GO attachment for moving palletized feed, building materials, equipment, and other properly supported loads. Its universal quick attach interface connects to compatible skid steers and tractor loaders, while an ITA Class 2 carriage holds correctly matched hook-style forks. The walk-through opening helps the operator see the fork tips during placement. A raised load back and chain connection points add options for handling tall or irregular material.

A Frame Built Around Load Control

The high load back gives upright pallets and bulky material a contact surface behind the forks. The open center helps the operator line up fork tips with pallet pockets and see the area ahead when setting down a load. Walk-through access can also make entering and leaving a compatible skid steer cab more convenient. Follow the carrier’s instructions for entry and check visibility from the actual operator position.

Chain connection points at the inside corners can be used when a load needs appropriate additional restraint. Choose chains and securing methods suited to the material and job; the points do not make an unsupported or poorly balanced load safe to lift. The frame’s built-in 6 degree rollback angle can help keep a properly positioned load against the back during transport. Keep loads low and travel at a speed suited to the ground conditions.

AG-GO builds this frame in the United States and finishes it with a protective powder coat. The Class 2 upper carriage rail is a one-piece solid steel component that engages matching fork hooks. The lower rail and fork locks must also fit and engage correctly. Inspect the carriage, locks, frame, coupler, and chain points for damage or wear as part of routine equipment checks.

Match the Forks, Coupler, and Capacity

The product page offers a frame-only selection and fork-length options of 42 inch, 48 inch, 60 inch, 72 inch, and 96 inch. It also lists fork-capacity choices of 4,000 lb, 5,000 lb, and 6,000 lb. Confirm the exact combination selected before ordering. A fork pair rated below the frame’s 6,000 lb rating limits the complete assembly to the lower figure, and the machine or coupler may impose a lower limit still.

Fork length should match the load and the carrier’s approved setup. Longer blades can support long pallets or materials, but they may also move the load’s center of gravity forward and reduce usable machine capacity. Check fork blade dimensions, load-center rating, ITA hook fit, pallet opening clearance, and available turning space. PRO-Link’s pallet fork selection guide explains the class and load-center checks.

Universal quick attach describes the connection between the frame and a compatible machine coupler. Verify coupler geometry and full locking-pin engagement on the particular skid steer or tractor loader. A tractor with a Euro, Global, or proprietary loader mount needs a frame designed for that interface rather than an assumed direct fit. Compare the AG-GO pallet fork frame options if your machine uses a different mount.

PRO-Link covers the 6048-UWT with a one year limited warranty against manufacturer defects under the applicable terms.

Questions & Answers

Does the 6048-UWT come with forks?

The listing offers a frame-only option and selectable fork configurations. Confirm the fork length and capacity shown for the option in your cart.

Does the 6,000 lb frame rating mean I can lift 6,000 lb?

Only if the forks, carrier, coupler, load center, and other parts of the complete setup also allow it. Follow the lowest applicable rating.

Will this frame fit any tractor loader?

No. It requires a compatible universal quick attach coupler with properly engaging locks. Check the actual loader interface before ordering.