4048-UWT 4,000 lb Skid Steer Pallet Fork Frame

Description

The 4048-UWT 4,000 lb skid steer pallet fork frame is an AG-GO walk-through attachment for moving pallets, feed, seed, building supplies, and other properly supported loads. It connects to a machine with a compatible universal skid steer quick attach coupler and carries ITA Class 2 pallet forks. The open center helps the operator see the fork tips and load placement area while providing a step for cab access. Select the frame-only version or a listed configuration with 42 inch or 48 inch forks according to the work you plan to do.

Walk-Through Design for Everyday Material Handling

A clear view ahead matters when lining forks up with pallet pockets, working near a trailer, or setting supplies into a tight storage area. The 4048-UWT’s open back gives the operator a sightline through the frame, and its slip-resistant step helps with access to the operator compartment. Keep the step clean and follow the machine manufacturer’s entry procedure.

The frame uses an ITA Class 2 carriage for compatible hook-type pallet forks. Forks can be positioned to match different pallet widths when their locks are released, then secured in the appropriate notches before lifting. Check the selected forks’ class, dimensions, and pair rating; a fork pair with a lower rating does not gain capacity because it sits on a 4,000 lb frame. PRO-Link’s pallet fork guide explains fork classes and load-center checks.

A built-in 6 degree kickout changes the frame’s rollback geometry. This can help an operator keep a properly supported load positioned toward the carriage, but load stability still depends on the material, fork spacing, machine operation, and terrain. PRO-Link lists frame-only dimensions of 47 3/4 inch length, 27 1/2 inch height, 7 1/2 inch bottom width, and 4 inch top width. Check machine clearance and the exact mounting arrangement before ordering.

Select the Right Coupler and Fork Configuration

Universal quick attach refers to the frame-to-machine connection. Verify that your skid steer, compact track loader, or tractor loader has the matching coupler and that its locking pins fully engage this attachment. The fork-to-frame connection is separate: it calls for matching ITA Class 2 hooks, rails, and fork locks. A machine’s brand name alone does not verify either connection.

The frame can be used for farm supply pallets, landscaping materials, construction supplies, and routine yard work when those loads fit the chosen forks and the carrier’s approved limits. A 42 inch fork may suit a different pallet depth and work area than a 48 inch fork. Confirm the load’s center of gravity, pallet openings, available maneuvering room, and fork capacity before selecting a length. If the job requires a higher rated frame, compare the AG-GO pallet fork frame range.

AG-GO manufactures this frame in the United States. Its 4,000 lb frame rating does not override a lower rating for the machine, coupler, fork pair, or actual load position. The attachment is covered by PRO-Link’s one year limited warranty against manufacturer defects, subject to the full terms.

Questions & Answers

Does the 4048-UWT include pallet forks?

That depends on the selected product option. PRO-Link lists frame only, 42 inch forks, and 48 inch forks; confirm the option shown in your cart before ordering.

Will it fit every skid steer?

No. Confirm the machine has a compatible universal quick attach coupler, that the locking pins engage, and that the carrier can handle the attachment and intended load.

Can I put Class 3 forks on this frame?

No. The carriage is designed for matching ITA Class 2 fork hooks and locks. Select correctly rated Class 2 forks for the planned work.