What Are Bale Spears and What Are They Used For?

Bale spears, also called hay spears or hay spikes, are pointed steel tines that pierce a compressed bale so a tractor, skid steer or other suitable machine can lift it. Farmers and ranchers use them to pick up bales in the field, load trailers, stack hay and move feed to livestock. “Bale spear” can also mean the complete attachment, which includes a frame and one or more tines.

In equipment catalogs, hay tines are the individual steel prongs. Hay forks can refer to a frame fitted with multiple tines or to an individual spear sold as a replacement. Hayspears® and HAYSTIX® are PRO-Link’s bale spear lines. Check whether the listing is for a spear by itself, a spear kit with mounting hardware or a complete attachment.

Which bales can a spear lift?

A bale spear attachment can lift round or large square bales of hay or straw when the frame and tine layout are designed for the bale’s shape and weight. A common round-bale frame has one long center spear that carries the bale and two short stabilizers that help keep it from rotating as you carry it to storage or a feeder.

Large square bales often need support across a wider area. Our AG-GO square hay bale frame uses seven spears spaced across the frame. That layout supports a wide bale at several points when you lift it from a stack or position it on a trailer. In a narrow barn aisle, leave room to back away far enough to withdraw the tines once the bale is set down.

square hay bale frame

Wrapped forage calls for a different approach if it’s going back into storage. A spear punctures the plastic and lets air into the bale. Use a bale squeeze designed for wrapped bales when the seal needs to stay intact.

How do bale spear attachments mount?

  • Rear three-point hitch. A three-point bale spear frame pins to the back of a tractor. Match the attachment’s hitch category to the tractor and check the rear lift capacity for the load position.
  • Tractor front-end loader. A front bale spear frame connects to the loader’s attachment carrier. Euro/Global and skid steer style quick attach are two examples. Identify the carrier on the loader before choosing the frame.
  • Skid steer quick attach. A skid steer bale spear frame mounts to a compatible front quick-attach coupler. This setup is commonly used to stage bales in the yard or load them onto trailers.

What should you check before choosing a bale spear?

Start with the weight of the heaviest bale you plan to move. Bales with the same dimensions can weigh different amounts depending on how densely they were packed and how much moisture they hold. Check the ratings for the spear, frame, coupler and machine. The lowest applicable limit governs what the setup can handle.

Pay attention to the load center listed with a capacity rating. It’s the horizontal distance from the manufacturer’s specified reference point to the load’s center of gravity. The farther out the weight sits, the more leverage it puts on the equipment. Carry bales low during travel and follow the machine and attachment manuals for ballast and operating limits.

If you’re replacing a tine, check how its shank fastens to the frame. A tapered shank seats in a matching sleeve and is secured with a nut. On a cross-bolt design, a bolt passes through aligned holes in the spear and sleeve. A bracketed assembly uses its specified bracket and fasteners. If the old part number is unreadable, photograph the mounting end and use our replacement bale spear guide to record the measurements before you order.

Visit us on Facebook: https://www.facebook.com/profile.php?id=61572395992757

or on

Youtube: https://www.youtube.com/@Prolinkhasthebestbalespears