12FMB 12 Foot Forklift Boom – 1,000 lb Capacity

Description

The AG-GO 12FMB 12 foot forklift boom converts properly matched pallet forks into an adjustable attachment for lifting and positioning suspended loads. It is intended for properly rigged trusses, machinery, pipe, equipment components, and other loads that cannot rest safely on ordinary fork blades.

The structural-steel boom provides six lifting positions spaced at 24 inch intervals. Each position carries a published 1,000 lb rating, providing consistent boom capacity throughout the adjustment range. A spring-loaded locking pin secures the boom in the selected position.

The 12FMB mounts over compatible forks without welding or permanent machine modification. Buyers can compare it with other material-handling accessories in PRO-Link’s pallet fork extensions and forklift boom category.

Six Adjustable Positions with a 1,000 lb Rating

Adjustable reach allows the operator to place the lifting point closer to or farther from the machine according to the job. The six positions are spaced in 24 inch steps across the boom’s 12 foot overall length. After the desired position is selected, the spring-loaded pin must be fully engaged before lifting begins.

Although every boom position is rated at 1,000 lb, moving a suspended load farther forward changes the complete machine’s load center and leverage. The boom rating does not increase the capacity of the forklift, loader, pallet-fork frame, supporting forks, hydraulics, or rigging. The lowest-rated part of the complete setup controls the safe working limit.

The machine must also account for the boom’s own weight and the effect of the selected reach. Before use, confirm that the carrier manufacturer permits the attachment and determine whether updated capacity information or operating restrictions apply. Never assume a forklift or loader can handle 1,000 lb at every boom position simply because the boom itself carries that rating.

Common applications may include:

• Positioning properly rigged roof trusses
• Lifting machinery or equipment components
• Handling pipe and structural materials
• Reaching loads that cannot rest directly on pallet forks
• Supporting controlled agricultural, construction, or industrial lifting

Fork-Mounted Installation and Suspended-Load Safety

The 12FMB slides over compatible fork blades. Because fork sizes, spacing, profiles, frames, and capacities vary, compatibility must be confirmed before ordering. The attachment should seat fully on both forks without binding, excessive movement, or modification to either the boom or supporting blades.

An included safety chain secures the boom to the forklift carriage or attachment frame and helps prevent the unit from sliding forward. The chain must be connected correctly and inspected along with the fork pockets, structural members, locking pin, welds, and lifting points before every use.

Suspended loads require proper rigging and careful control. Use rated rigging suited to the load, keep the load balanced, and make sure it cannot shift, rotate, or swing unexpectedly. Never side-load the boom, drag a load, exceed the published rating, or allow anyone beneath a raised load.

Keep the boom and load as low as practical during travel. Move slowly, avoid abrupt steering or braking, and allow added clearance around buildings, racks, trailers, gates, power lines, people, and equipment. Uneven ground, slopes, wind, and a swinging load can reduce stability. A trained operator should follow the machine, attachment, and rigging instructions for the complete lift.

The 12FMB is manufactured in the USA as part of PRO-Link’s AG-GO attachment line. Customers who need help confirming fork fit or intended use can contact PRO-Link with machine information, fork measurements, photographs, and load details.

Questions & Answers

Does the 12 foot forklift boom maintain its 1,000 lb rating at all six positions?

Yes. Each of the six positions carries a published 1,000 lb boom rating. However, the machine’s usable capacity may decrease as the lifting point moves forward, and the lowest-rated component controls the completed setup.

Does the forklift boom require permanent installation?

No. The boom slides over compatible forks and is secured to the carriage or attachment frame with the included safety chain. Fork dimensions, spacing, capacity, and complete fit must be verified before use.

What warranty covers the 12FMB?

The attachment is covered by the PRO-Link one-year limited warranty against manufacturer’s defects under the published terms. Normal wear, misuse, overloading, improper fit, unauthorized modification, and operation outside the intended purpose are not covered.