BF8060 60 Inch Backhoe Forks – 8,000 lb Capacity

The AG-GO BF8060 60 inch backhoe forks add extended material-handling reach to a properly matched backhoe or larger loader bucket. This removable over-the-bucket system is designed for long, deep, bulky, and palletized loads that may need more support underneath than a standard 48 inch fork can provide. Its 8,000 lb published kit rating, heavy steel shaft, adjustable spacing, and 60 inch blades make it a practical choice for demanding agricultural, construction, and industrial work.

The BF8060 can help support pipe, poles, roof trusses, lumber bundles, logs, oversized pallets, fencing supplies, building materials, and farm products. The extra blade length reaches farther beneath these materials, helping the operator position loads that could be difficult to support on shorter forks. Buyers should remember that added length also places the load farther forward when weight is carried near the tips, so machine capacity, balance, and load position remain important.

Operators comparing capacities, fork lengths, and bucket requirements can review PRO-Link’s complete selection of AG-GO bucket fork kits before ordering.

Extended-Reach Backhoe Forks for Long Materials

The BF8060 is built around a matched pair of 60 inch fork blades. That additional reach is useful when material extends well beyond a standard pallet or when the load needs support farther from front to back. Construction crews may use the forks for lumber, pipe, trusses, poles, steel components, concrete forms, and bundled building supplies. Farms and ranches may use them for feed, seed, fertilizer, fencing, posts, logs, pallets, and supplies used around hay and livestock operations.

Fork spacing adjusts along the shaft. The operator can move the fork assemblies closer together for narrower loads or farther apart for wider pallets and bundles. Both forks should be positioned evenly around the center of the bucket so the load remains balanced and each blade provides proper support.

The BF8060 system includes:

• One matched pair of 60 inch heavy-duty fork blades
• Reinforced welded steel fork bushings
• One 2 inch heavy-duty steel shaft
• Shaft lengths available up to 87 inches
• Four steel weld-on mounting hooks
• A retaining washer and hitch pin

The longer forks distinguish this model from the BF8048. Both kits carry an 8,000 lb published rating and are intended for properly matched larger equipment, but they serve different handling priorities. The BF8060 provides additional support beneath deep pallets and long materials. The BF8048 48 inch bucket fork kit is the better comparison when standard pallet handling and easier maneuvering in tighter work areas matter more than maximum reach.

Weld-On Hooks and Removable Fork Assembly

The BF8060 uses four supplied steel hooks welded to the top front area of a compatible bucket. These hooks support the shaft across the bucket, while the fork assemblies slide onto the shaft through their welded bushings. The retaining washer and hitch pin secure the assembly during operation. The fork blades themselves are not welded to the bucket.

Once the hooks are installed, the operator can use controlled bucket movements to engage or set down the shaft-and-fork assembly. No hydraulic connection is required. Only the mounting hooks stay permanently attached, allowing the bucket to return to digging, loading loose material, hauling, grading, or cleanup work after the fork assembly is removed.

Hook placement affects shaft alignment, fork position, bucket contact, and how lifting forces enter the bucket structure. A qualified welder or fabricator should inspect the bucket and complete the installation. Before welding, the installer should confirm the bucket’s top-edge shape, reinforcement, steel thickness and condition, hook area, shaft clearance, fork position, and intended working loads.

Bucket Compatibility, Capacity, and Safe Operation

The BF8060 is designed for compatible bucket openings up to 43 inches. It may be used with properly matched backhoes, larger front-end loaders, wheel loaders, tractors, skid steers, and utility loaders. This is not a universal-fit attachment. A machine’s brand or model cannot confirm compatibility without checking the actual bucket.

Case-style hooks serve many Case buckets. J-hooks are commonly used with John Deere and many non-Case buckets when their geometry is appropriate. Buyers should measure the bucket opening and width, examine the top-edge profile and reinforcement, and confirm the required shaft length and available clearances.

PRO-Link’s bucket fork selection and installation guide explains how the system mounts and compares all six AG-GO kit sizes.

Customers with unusual bucket dimensions can contact PRO-Link at 855-361-5987 to discuss custom shaft widths or hook configurations. Custom work must be evaluated for the specific bucket and application, so measurements and photographs should be provided before any fit or fabrication decision is made.

Understanding the 8,000 lb Published Rating

The BF8060’s 8,000 lb rating applies to the bucket fork kit. It does not increase the rated lifting capacity of the machine, loader arms, hydraulics, or bucket. The usable limit of the completed setup is determined by its lowest-rated component, including the machine, tires, ballast, bucket, hooks, welds, shaft, fork blades, bushings, retaining hardware, and operating conditions.

Load position becomes especially important with 60 inch forks. Moving weight toward the blade tips increases leverage against the bucket and loader, which can reduce available lifting ability and machine stability. A compact pallet loaded evenly near the fork backs behaves differently from long pipe, logs, or an uneven bundle with an uncertain center of gravity. Operators should know the approximate load weight, keep the heaviest portion close to the fork backs, and follow the machine manufacturer’s capacity and ballast instructions.

Before each use, inspect the blades, bushings, shaft, hooks, welds, washer, hitch pin, and bucket structure. Stop using the attachment if any component is loose, bent, cracked, excessively worn, or misaligned. Space the forks evenly, center and secure the material, carry the load low, travel slowly, and allow additional turning and stopping room. Never allow anyone to ride on the forks or stand beneath a raised load.

The related bucket fork measuring and setup guide provides additional selection, installation, and operating information.

The BF8060 is manufactured in the USA as part of PRO-Link’s AG-GO attachment line. It combines long fork support with a removable design that lets properly matched backhoes and loaders perform material-handling work without permanently giving up normal bucket functions.

Questions & Answers

What should I measure before ordering 60 inch backhoe forks?

Measure the bucket opening, overall width, and top-edge profile. Check the bucket’s construction, reinforcement, steel condition, hook area, required shaft width, and available clearances. Also confirm the machine and bucket capacity, selected hook style, professional installation requirements, and the weight and shape of the intended loads.

When should I choose the BF8060 instead of the BF8048?

Choose the BF8060 when deep pallets, pipe, lumber, trusses, poles, logs, or other long materials need support farther beneath the load. Choose the BF8048 when 48 inch blades provide enough support and easier maneuvering is more important. Both models have an 8,000 lb published kit rating.

What warranty covers the BF8060?

The BF8060 is covered by the PRO-Link one-year limited warranty against manufacturer’s defects under the published terms. Normal wear, misuse, overloading, improper installation, unauthorized alterations, and use outside the product’s intended purpose or capacity limits are not covered.