CA-F784 Front Cotton Bale Frame – Custom Loader Attachment

Description

The AG-GO CA-F784 front cotton bale frame is a heavy-duty, front-mounted attachment built for handling large cotton bales and round cotton modules with compatible wheel loaders and telehandlers. Four long cotton spears engage the bale across multiple points, while the rigid steel frame supports controlled lifting, carrying, staging and loading in fields, storage areas and cotton-processing yards.

Every CA-F784 is configured around the customer’s required machine coupler. This custom approach allows PRO-Link’s AG-GO team to match the attachment connection to the supplied carrier information instead of treating one mounting plate as universal. The completed machine, coupler, attachment and spear system must all be suitable for the bale weight, load position and operating environment.

Buyers comparing front and rear configurations, replacement cotton spears and mounting components can review the complete selection of AG-GO cotton bale handling equipment.

Reinforced Steel Frame with Four 84 Inch Cotton Spears

The CA-F784 is fabricated from high-strength steel and protected with a durable powder-coat finish. Its reinforced structure is intended for repeated use during cotton harvest, staging and processing, where equipment may encounter dust, plant material, changing weather and abrasive yard conditions. The powder coat helps protect the steel surface, but operators should still inspect and repair damaged coating before corrosion can spread.

The frame carries four 84CS 84 inch cross-bolt cotton stabs. Each straight COTTONSTIX spear measures 2 inches in diameter and 84 inches in length. The extended reach allows the tines to penetrate deeply into a large cotton bale, while the four-spear arrangement engages the load at several locations to improve control compared with relying on a single contact point.

Each 84CS spear has a published rating of 1,600 lb at a 48 inch load center. Four individual spear ratings must not be added together to create an attachment or machine capacity. The finished system is always limited by its lowest-rated component, including the spears, collars, cross-bolts, frame, coupler, loader and tires. Load position also matters because carrying a bale farther forward reduces the lifting ability available at the attachment.

The 84CS uses a straight cross-bolt mounting system rather than a tapered connection. Each spear slides into a compatible collar until the holes align, and the specified cross-bolt passes through the spear and sleeve to retain it. Before operation, inspect all four spears, points, collars, bolts, nuts, frame members and welds. Stop using the attachment if a component is loose, bent, cracked, distorted, badly worn or unable to align correctly.

For additional background on cotton spear and frame configurations, operators can read the COTTONSTIX cotton mover guide.

Custom Coupler Configuration and Machine Fit

The CA-F784 is shown with a Caterpillar IT28 coupler, but that photographed configuration does not establish compatibility with every Caterpillar loader. Custom coupler possibilities may include properly identified JRB, Fusion, SkyTrak, Gehl, Gradall, Lull, New Holland, JCB, JLG, Case and John Deere systems. Coupler names and machine brands are only starting points because dimensions, hook locations, pin arrangements and locking geometry can vary among models and generations.

Before fabrication, provide the exact machine make and model, coupler identification, relevant measurements and any requested photographs or technical information. PRO-Link’s engineering team must review the connection and confirm the configuration. A custom coupler should not be ordered from a brand name alone, and availability for a particular machine must be confirmed before purchase.

The carrier must also have adequate rated lift capacity, operating weight, counterweight, tire capacity and stability for the CA-F784 and cotton bale. Consider the actual bale weight and center of gravity rather than relying only on typical bale dimensions. Conditions such as soft soil, ruts, slopes and uneven loading can change how the machine responds.

Typical CA-F784 applications include:

• Moving round cotton modules from the field
• Staging bales for pickup or processing
• Loading and unloading suitable transport equipment
• Repositioning cotton in gin or storage yards
• Supporting high-volume post-harvest handling

Engage the bale evenly with all four spears, keep the attachment level and carry the load as low as practical during travel. Accelerate, turn and stop gradually. Avoid side loading, shock loading and travel across unsafe slopes. Keep workers clear of the attachment and never allow anyone beneath or directly in front of a raised bale. Follow the machine manufacturer’s operating, ballast and attachment instructions at all times.

The CA-F784 is manufactured in the USA at PRO-Link’s AG-GO production facility under the direction of its engineering team. Domestic fabrication allows the custom coupler and frame configuration to be reviewed as part of the same attachment-building process. The product is covered by a one-year limited warranty against manufacturer’s defects.

Questions & Answers

Does the CA-F784 fit every wheel loader or telehandler?

No. Each attachment is configured for an identified coupler. The exact machine, coupler style, dimensions, locking geometry, operating clearance and loader capacity must be confirmed before ordering.

What cotton spears are used on the CA-F784?

The frame uses four 84CS straight cross-bolt cotton spears measuring 2 inches in diameter and 84 inches in length. Each spear is individually rated at 1,600 lb at a 48 inch load center.

What determines the completed attachment’s lifting capacity?

Capacity is controlled by the lowest-rated part of the complete system and the machine manufacturer’s limits. Individual spear ratings cannot be combined to establish the capacity of the frame or loader.