49TXJ 49 Inch Best Selling Bale Spear with 144T Sleeve

Description

The HAYSTIX® 49TXJ is PRO-Link’s 49 inch best selling bale spear and the company’s number one individual spear based on its sales rankings. The complete assembly combines a 49 inch by 1.75 inch square Conus II tapered tine, a matching 144T weld-in sleeve, and PRO-Link’s patented Doublenut® mounting hardware. The individual spear is rated at 3,500 pounds at a 30 inch load center.

This model provides enough reach for deep engagement in many large round and square bales without extending as far as a 55 inch tine. It is a practical choice for new hay-frame fabrication or a repair that requires both the spear and collar. The 49TXJ has the traditional square HAYSTIX® profile; buyers wanting PRO-Link’s newer fluted design should compare it with the 49FXJ.

49 Inch Best Selling Bale Spear for Round and Square Bales

The square shaft narrows gradually toward the point, helping the spear enter compressed bale material progressively. Its tapered shape can also support smoother withdrawal when unloading a trailer, stacking hay, placing feed into a ring, or moving bales between storage and livestock areas.

The 49TXJ may handle suitable alfalfa, Bermuda grass, prairie hay, mixed-grass hay, wheat straw, cornstalk bales, silage, and haylage. Bale dimensions alone do not determine whether the setup is safe. Moisture, crop type, density, wrapping, and compression can make two similarly sized bales weigh very differently. The correct number of spears, stabilizer-tine arrangement, spacing, frame strength, and machine capacity must match the actual load.

When fabricated into a compatible attachment, the assembly may be used in tractor front-end loader frames, skid steer bale carriers, telehandler attachments, wheel-loader frames, bale movers, and properly designed AG-GO hay frames. These are potential applications rather than universal fit claims. Compatibility depends on sleeve placement, frame construction, coupler geometry, operating clearance, ballast, and the capacity of the complete machine.

PRO-Link’s best selling hay bale spear rankings explain why the 49TXJ leads the company’s individual-spear lineup. For operating guidance beyond the product specifications, Penn State Extension provides practical information on safely moving and storing large hay bales, including keeping loader-carried bales low and confirming that the tractor and attachment can handle the load.

144T Sleeve and Doublenut® Mounting

The included 144T tapered sleeve must be welded into suitable steel tubing or another properly supported frame location. Remove the tine and nuts before welding. A qualified fabricator should determine the collar direction, projection, alignment, surrounding steel, and welding procedure.

After the frame cools, the Conus II shank seats in the collar. Tightening the conical nut draws the matching tapered surfaces together. The jam nut then locks against the first nut to help resist vibration-related loosening. The updated Doublenut® bale spear mounting guide explains seating, replacement checks, and routine inspection.

PRO-Link has demonstrated the 49TXJ under an approximately 4,300 to 4,400 pound test load. That demonstration does not raise its published working capacity or authorize operation above 3,500 pounds at a 30 inch load center. The complete setup is always limited by its lowest-rated part, including the spear, collar, nuts, welds, frame, coupler, hydraulics, loader, and machine.

Inspect the point, square shaft, taper, threads, nuts, sleeve, welds, and frame regularly. Stop using damaged or loose equipment. The 49TXJ is covered by PRO-Link’s one-year limited warranty against manufacturer’s defects, subject to the complete terms.

Questions & Answers

Why is the 49TXJ PRO-Link’s 49 inch best selling bale spear?

Its practical reach, 1.75 inch square tapered profile, complete sleeve package, Doublenut® system, and 3,500 pound rating meet many common fabrication and replacement needs.

What is included with the 49TXJ?

The assembly includes the 49 inch Conus II bale spear, 144T weld-in collar, conical nut, and jam nut.

Does the 49TXJ fit every tractor or skid steer hay frame?

No. The sleeve requires professional welding into a compatible frame. Confirm the structure, coupler, spear position, clearance, ballast, and complete equipment capacity before use.