S48T 48 Inch Replacement Tapered Bale Spear – Hayspears®

The Hayspears® S48T 48 inch replacement tapered bale spear replaces a worn tine in a compatible hay frame without removing a serviceable weld-in collar. Its 1.625 inch fluted shaft and tapered mounting end support deep engagement in suitable round or square bales. The spear is rated at 3,000 pounds at a 30 inch load center.

This listing includes the replacement tine only, without a sleeve or complete mounting-hardware set. The S48T is commonly paired with the 114T tapered sleeve, but buyers must identify the existing mount before ordering. Diameter alone does not prove compatibility.

Replacing a Tapered Hay Tine in an Existing Frame

The S48T can return an attachment to service when its removable spear is damaged but the collar, welds, and frame remain sound. Inspect the existing installation carefully because a new tine cannot repair a cracked weld, distorted collar, damaged taper, worn threads, or weakened frame.

The 114T 1.625 inch tapered sleeve is the verified collar for PRO-Link’s 48TS, 39TS, and 33TS assemblies and their matching tines. Clean the sleeve taper, spear shank, threads, and nut. Insert the spear, position its fluted sides parallel to the ground, and tighten the correct conical nut so the surfaces draw together.

Do not substitute a cross-bolt collar, unverified nut, or similar-looking sleeve. Match the taper, shank, threads, seating depth, retaining system, and rear clearance. PRO-Link’s bale spear sleeve and collar guide explains tapered, cross-bolt, and bracketed mounts.

Buyers building a new frame or replacing an unusable collar can compare the 48TS complete tapered bale spear assembly, which includes the S48T, 114T weld-in sleeve, and conical retaining nut.

Fluted Performance for Farm and Livestock Work

The S48T is manufactured from heat-treated high-strength steel for repeated agricultural use. Its fluted profile helps the tine enter tightly packed forage with less resistance and release more cleanly after the bale is placed. This is useful when handling dense grass hay, alfalfa, mixed hay, straw, cornstalk bales, or other baled feed materials.

The spear may also be used with wet hay, frozen bales, silage, or haylage when the actual load remains within every applicable limit. These materials can weigh considerably more than dry hay of the same outside size. Bale dimensions, moisture, crop type, compression, and load position must all be considered before lifting.

Common applications include properly engineered frames for tractor loaders, skid steers, compact loaders, front-end loaders, three-point bale movers, and custom equipment. These are examples, not universal-fit claims. Confirm the frame, spear spacing, stabilizers, machine capacity, ballast, coupler, and operating clearance.

The 3,000 pound rating applies to the individual spear at a 30 inch load center. It does not establish the capacity of the collar, welds, attachment, loader, or machine. The lowest-rated part of the entire setup controls the working limit. Inspect the spear, nut, sleeve, welds, and frame regularly; stop using any component that is loose, bent, cracked, distorted, or badly worn. Keep the bale low during travel and follow the machine manufacturer’s operating instructions. The S48T is protected by PRO-Link’s one-year limited warranty against manufacturer’s defects.

Questions & Answers

What is included with the S48T?

The S48T listing includes the 48 inch tapered fluted spear only. A sleeve or collar is not included. Inspect the existing retaining nut and mounting components and replace them with the correct parts when needed.

Is the S48T the right 48 inch replacement tapered bale spear for my frame?

It is designed for a compatible 1.625 inch tapered mounting system and is commonly paired with the 114T sleeve. Confirm the complete taper, shank, threads, seating depth, nut, and clearance rather than relying on diameter alone.

Can the S48T handle both round and square bales?

Yes, it can handle suitable round and square bales when correctly installed in an appropriate frame. Actual suitability depends on bale weight and condition, spear placement, attachment capacity, machine limits, and safe operating practices.